PF Flush Door
Our flush doors are manufactured from selected hard wood timber with preservative treated and well seasoned. Due to more durable and highly dimensionally stable our products are used for interior and exterior purpose both. Not only our doors are structurally strong but they acts as good insulators against heat and sound.
1. Chemically treated and vacuum pressed to make them both heat and water resistant.
2. Dimensionally accurate and stable, minimizing chances of gaps, warps and twists even in extreme weather conditions.
3. Superbly durable with a high screw holding capability
4. Specially reinforced lock area (“lock block”) on both sides for maximum security
Standard Thickness : 25mm, 30mm, 32mm, 35mm upto 50mm
Length ,Width: Customise
TEST | ISI REQUIREMENT |
OBSERVED VALUE |
---|---|---|
Dimension | Length,Width + 5mm Thickness + 1mm | Within Limits |
General Flatness | Twist, Cupping, Warping Not To Exceed 6mm | |
Local Planeness | Depth of deviation at any point to be less than 0.5 mm | Within limits |
Impact Indentation Test | Depth of Indentation not to exceed 0.2 mm | Within limits |
Buckling Test | Initial deflection - 50 mm residual deflection - 5 mm | Within limits |
Slamming Test | No visible damage after Test | No visible damage |
Varying Humidity Test | No visible warping, twisting or de-lamination | No such defects observed |
Knife Test | Minimum Pass Standard | Excellent |
Glue Adhesion Test | No de-lamination | No de-lamination |